# Beams Analyse Slope MCQ Questions & Answers

Beams Analyse Slope MCQs : This section focuses on the "Beams Analyse Slope". These Multiple Choice Questions (MCQs) should be practiced to improve the Beams Analyse Slope skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.

Question 1

Solar arrays are defined in terms of ____________

A. Circuits
B. Diodes
C. Kernel
D. Panels

Question 2

In a cantilever of span “L” subjected to a concentrated load of “W” at a distance of L/3 from free end. The deflection is ________

A. WL3/3EI
B. 14WL3/81EI
C. WL3/81EI
D. 8WL3/81EI

Question 3

The first solar cooker was developed in the year ____________

A. 1947
B. 1953
C. 1945
D. 1960

Question 4

Cantilever scaffolding is also known as ____________

A. mason’s scaffolding
B. suspended scaffolding
C. needle scaffolding

Question 5

A cantilever beam subjected to a point load at free end of span “l” m and possess flexural rigidity (EI).

A. Wl3 / 6EI
B. Wl4/ 8EI
C. Wl2/ 2EI
D. Wl4/ 5EI

Question 6

In a cantilever of span L  subjected to a concentrated load of W  at a distance of L/3 from free end. The deflection is ________

A. WL3/3EI
B. 14WL3/81EI
C. WL3/81EI
D. 8WL3/81EI

Question 7

Scaffolding you generally adopted when the height of structure is above ___________

A. 1.3 m
B. 1.5 m
C. 1.7 m
D. 2.2 m

Question 8

The ultimate bearing capacity/factor of safety = ____________

A. Bearing capacity
B. Allowance bearing capacity
C. Safe bearing capacity
D. Soil consolidation capacity

Question 9

The horizontal platform in between any two flights of a staircase is called ___________

A. Landing
C. Nosing
D. Stringer

Question 10

The ratio of maximum load to the unit area is ________

A. Ultimate bearing capacity
B. Allowable bearing capacity
C. Safe bearing capacity
D. Bearing capacity

Question 11

_____ is measured on percentage basis.

A. Camber
B. Formation width
C. Super elevation
D. Shoulder

Question 12

______ bridge any opening like a window, door, cupboard etc in a building.

B. Lintel
C. Footings
D. Stairs

Question 13

Full form of NBC ___________

A. Nominal Building Centre
B. National Building Code
C. National Building Cluster
D. Nominal Buoyance Centre

Question 14

Which of the following is a mechanical property of materials?

A. Surface Tension
B. Compressibility
C. Elasticity
D. Specific volume

Question 15

A cantilever beam subjected to a point load at free end of span l  m and possess flexural rigidity (EI).

A. Wl3 / 6EI
B. Wl4/ 8EI
C. Wl2/ 2EI
D. Wl4/ 5EI

Question 16

Calculate the slope in a simply supported beam subjected to point load at centre. Take the EI into consideration.

A. Wl3/4EI
B. Wl2/16EI
C. Wl3/8EI
D. Wl4/6EI