Cantilever Deflection MCQs : This section focuses on the "Cantilever Deflection". These Multiple Choice Questions (MCQs) should be practiced to improve the Cantilever Deflection skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.
Question 1
_______ fluids are practical fluids
A. Ideal
B. Real
C. Vortex
D. Newtonian
Question 2
Air and water are the examples of ___________
A. Non Newtonian fluids
B. Vortex fluids
C. Real fluids
D. Ideal fluids
Question 3
Calculate the maximum deflection of a cantilever beam with udl on entire span of 3m the intensity of you udl be 25 kN/m. Take EI as 4000 kN/m2.
A. 0.052m
B. 0.063m
C. 0.076m
D. 0.09m
Question 4
Calculate the specific gravity of mercury.
A. 12.5
B. 14.7
C. 13.6
D. 11.8
Question 5
Compute the maximum deflection at free end of a cantilever beam subjected to udl for entire span of l metres.
A. wl4/8EI
B. wl4/4EI
C. wl3/8EI
D. wl2/6EI
Question 6
In an ideal fluid, the ____________ stresses are pretend to be absent.
A. Bending
B. Shearing
C. Tensile
D. Compressive
Question 7
In cantilever beam the deflection occurs at ______
A. Free end
B. Point of loading
C. Through out
D. Fixed end
Question 8
Specific gravity of water is __________
A. 0.8
B. 1
C. 1.2
D. 1.5
Question 9
Specific weight of water at 4°C is ____________ N/m3.
A. 9810
B. 9760
C. 9950
D. 9865
Question 10
Stiffness of the beam is inversely proportional to the _____ of the beam.
A. Slope
B. Support reaction
C. Deflection
D. Load
Question 11
The inverse of specific weight of a fluid is __________
A. Specific gravity
B. Specific Volume
C. Compressibility
D. Viscosity
Question 12
The maximum ____ should not exceed the permissible limit to the span of the beam.
A. Slope
B. Deflection
C. Load
D. Bending moment
Question 13
The ratio of maximum deflection of a beam to its ___________ is called stiffness of the beam.
A. Load
B. Slope
C. Span
D. Reaction at the support
Question 14
Which of the following is not an example of Malleability?
A. Wrought Iron
B. Ornamental silver
C. Torsteel
D. Ornamental gold