Combined Bending MCQs : This section focuses on the "Combined Bending". These Multiple Choice Questions (MCQs) should be practiced to improve the Combined Bending skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.
Question 1
________ possesses less silting and scouring.
A. Weir
B. Barrage
C. Dams
D. Reservoir
Question 2
________ protects the weir from erosive forces during floods.
A. Talus
B. Curtain walls
C. Shutter
D. Upstream solid apron
Question 3
_________ is a pure water pressure.
A. Uplift
B. Percolation
C. Scour
D. Flood bank
Question 4
__________ causes of uplift of structure.
A. Percolation
B. Scour
C. Critical Velocity
D. Slope Failure
Question 5
__________ torque occurs along with maximum shear stress due to combined bending and torsion.
A. Equipment
B. Coaxial
C. Biaxial
D. Lateral
Question 6
A solid shaft of circular in section is subjected to torque which produces maximum shear stress in a shaft. Calculate the diameter of the shaft.
A. (16T/?f)3/2
B. (16f/?T)1/2
C. (16f/?) 1/2
D. (?T/16f) 1/2
Question 7
Gross storage - Dead storage is _______
A. Live storage
B. Virtual storage
C. Excessive storage
D. Free storage
Question 8
In __________ there will be no means for silt disposal.
A. Weir
B. Barrage
C. Reservoir
D. Dams
Question 9
The level of top of weir can be termed as __________
A. Talus
B. Curtain walls
C. Crest
D. Shutter
Question 10
The torque which produces unit twist per unit length is ________
A. Torsional rugosity
B. Torsional rigidity
C. Torsional viscosity
D. Torsional mean radius
Question 11
When a shaft is subjected to pure twisting then the type of stress developed is ________
A. Bending
B. Axial
C. Shear
D. Normal
Question 12
When two dissimilar shafts are connected together, then the shaft is __________
A. Integrated shafts
B. Composite shafts
C. Differential shafts
D. Combined shafts
Question 13
Which of the following is not affected by temperature?
A. Fabric sheets
B. G I sheets
C. AC sheets
D. Flat roofs
Question 14
Which of the following is not sound proof?
A. G I sheets
B. A C sheets
C. PVC sheets
D. Fabric sheets
Question 15
Which of the following possess good insulation properties?
A. Battened roofs
B. Wooden roofs
C. Jack arch roofs
D. Flat roofs
Question 16
A solid shaft of circular in section is subjected to torque which produces maximum shear stress in a shaft. Calculate the diameter of the shaft.
A. (16T/πf)3/2
B. (16f/πT)1/2
C. (16f/π) 1/2
D. (πT/16f) 1/2
Question 17
Gross storage – Dead storage is _______
A. Live storage
B. Virtual storage
C. Excessive storage
D. Free storage