Doors & Windows Location MCQs : This section focuses on the "Doors & Windows Location". These Multiple Choice Questions (MCQs) should be practiced to improve the Doors & Windows Location skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.
Question 1
A door should not be located in the centre of a wall.
A. True
B. False
Question 2
A window should be located on the __________ side of a room as seen from the point of view of fresh air.
A. Eastern
B. Northern
C. Western
D. Southern
Question 3
In the designation 10 WT 13, letter T stands for _________
A. Double shutter
B. Single shutter
C. Window opening
D. Height of opening
Question 4
In the designation 6 WS 12, the letter S stands for __________
A. Window opening
B. Single shutter
C. Double shutter
D. Height of opening
Question 5
The length of a module as recommended by Indian Standard is __________
A. 100 mm
B. 100 cm
C. 10 mm
D. 50 mm
Question 6
The minimum area of windows should be __________ of the floor area in case of public buildings.
A. 10%
B. 15%
C. 20%
D. 25%
Question 7
The panels are fully glazed in a __________ window.
A. Sliding window
B. Sash window
C. Double hung window
D. Fixed window
Question 8
Which of the following factors does not determine the selection of the location of a window?
A. Size of the room
B. Location of the room
C. Number of bricks used
D. Direction of wind
Question 9
Which of the following is not a function of a window?
A. To admit light into the building
B. To admit air to the building
C. To admit water to the building
D. To provide thermal insulation
Question 10
Which of the following rules is used in order to select the location of a window?
A. Height of window = 1/8 (width of room + breadth of room)
B. Breadth of window = 1/8 (width of room + height of room)
C. Length of window = 1/8 (width of room + breadth of room)
D. Width of window = 1/8 (height of room + breadth of room)