Eccentric in Both Directions MCQs : This section focuses on the "Eccentric in Both Directions". These Multiple Choice Questions (MCQs) should be practiced to improve the Eccentric in Both Directions skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.
Question 1
The pitch of the lateral ties shall not be more than the least of the ______________
A. 300mm
B. 450mm
C. 500mm
D. 550mm
Question 2
The inclined members carrying compressive loads are ________
A. Pedestal
B. Strut
C. Post
D. Winch
Question 3
If the columns are effectively held in position and restrained against rotation at both ends. Recommend the value of effective length.
A. 0.6×l
B. 0.65×l
C. 0.77×l
D. 0.9×l
Question 4
If the columns are effectively held in position and restrained against rotation at both ends. Recommend the value of effective length.
A. 0.6Ãl
B. 0.65Ãl
C. 0.77Ãl
D. 0.9Ãl
Question 5
A column in which reinforcement is wound spiral is ___________
A. Tied column
B. Spiral column
C. Composite column
D. Short column
Question 6
Determine the working stress in the factor of safety is 3 and ultimate load is what 127.32N?
A. 46 N/m2
B. 55 N/m2
C. 48 N/m2
D. 42 N/m2
Question 7
In continuous beams ______ moment develops at supports.
A. Hogging
B. Sagging
C. Couple
D. Static
Question 8
Volumetric strain = 3Ã _____________
A. Linear strain
B. Lateral strain
C. Linear stress
D. Lateral stress
Question 9
Polygonal links are also known as _____________
A. Bent up bars
B. Crancked bars
C. Lateral ties
D. Anchorage bars
Question 10
Lighter materials of construction can be used for a continuous beam.
A. TRUE
B. FALSE
Question 11
The minimum depth of foundation in all types of soils is _________
A. 350mm
B. 680mm
C. 500mm
D. 280mm
Question 12
In continuous beams ______________ moments is always less than support moments.
A. Upward
B. Mid span
C. Downward
D. Sagging
Question 13
Volumetric strain = 3× _____________
A. Linear strain
B. Lateral strain
C. Linear stress
D. Lateral stress
Question 14
In T beams, maximum ______ is less.
A. Shear force
B. Bending moment
C. Bending stress
D. Shear stress
Question 15
As per IS 456-2000, the minimum eccentricity for columns shall be given by ________
A. l/500 + D/30
B. l/450 + D/45
C. l/400 + D/40
D. l/250 + D/25
Question 16
________ is a good example for malleability.
A. Glass
B. Concrete
C. Copper
D. Lead
Question 17
In T beams, the most of the compressive force is shared by __________
A. Web
B. Flange
C. Rib
D. Neutral axis