# Indeterminate Beam MCQ Questions & Answers

Indeterminate Beam MCQs : This section focuses on the "Indeterminate Beam". These Multiple Choice Questions (MCQs) should be practiced to improve the Indeterminate Beam skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.

Question 1

Flow of water when a tap is just open is an example of __________ flow.

A. Uniform
D. Turbulent

Question 2

Glass is an example of _________

A. Elastic
B. Brittle
C. Toughness
D. Hardness

Question 3

Find out the elongation of a tie of 2m long, if the axial rigidity is 5000 Ã 104 mm2. The axial pull be 20 kN.

A. 0.8 mm
B. 0.6 mm
C. 0.5 mm
D. 1mm

Question 4

In deflection of a continuous beam, when loaded there will be convexity upwards over _________ supports.

A. End
B. Alternate
C. Intermediate
D. Every

Question 5

____________ is used to empty a tank of water having no outlet.

A. Venacontracta
B. Syphon
C. Summit
D. Dyne

Question 6

Moment distribution method is also known as __________

A. Hardy Cross method
B. Macaulay's method
C. Mohr's Theorems method
D. Kennedy's theory

Question 7

Find out the elongation of a tie of 2m long, if the axial rigidity is 5000 × 104 mm2. The axial pull be 20 kN.

A. 0.8 mm
B. 0.6 mm
C. 0.5 mm
D. 1mm

Question 8

Which of the following devices measures the velocity of flow?

A. Pitot tube
B. Venturimeter
C. Orificemeter
D. Hydraulic jacks

Question 9

The _________ is more over the supports then at midspan in continuous beams.

A. Slope
B. Bending moment
C. Deflection
D. Shear force

Question 10

Pascal's law is applied in ____________

A. Pitot tube
B. Hydraulic lift
C. Orificemeter
D. Venturimeter

Question 11

Which of the following them is also known as multi span beam _______

A. Cantilever beam
B. Simply supported beam
C. Fixed beam
D. Continuous beam

Question 12

Moment distribution method is also known as __________

A. Hardy Cross method
B. Macaulay’s method
C. Mohr’s Theorems method
D. Kennedy’s theory

Question 13

Bernoulli's equation is applicable only for ___________ flow.

A. Rotational
C. Compressible

Question 14

Pascal’s law is applied in ____________

A. Pitot tube
B. Hydraulic lift
C. Orificemeter
D. Venturimeter

Question 15

Which of the following is the coefficient of pitot tube?

A. 0.96
B. 0.98
C. 0.97
D. 0.95

Question 16

A beam which is supported on more than two supports is called as______

A. Fixed beam
B. Continuous beam
C. Cantilever beam
D. Simply supported beam

Question 17

A Straight cantilever of uniform area carries a udl over its entire length. If the free end of a cantilever is now prop at the level of the fixed end, the vertical force required at the prop be __________

A. 3/4 W
B. 3/8 W
C. 5/8 W
D. W