Sectional Views MCQs : This section focuses on the "Sectional Views". These Multiple Choice Questions (MCQs) should be practiced to improve the Sectional Views skills required for various interviews (campus interview, walk-in interview, company interview), placement, entrance exam and other competitive examinations.
Question 1
A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
A. Offset
B. half
C. whole
D. broken out
Question 2
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
A. half
B. whole
C. revolved
D. broken out
Question 3
Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.
A. Center line
B. Hatch line
C. Poly line
D. Dimension line
Question 4
In architectural drawing ________ are often used to illustrate and detail structural components.
A. Foundation beam detail sections
B. Wall sections
C. Building sections
D. All of the above
Question 5
In offset sections, offsets or bends in the cutting plane are all:
A. 90 degrees
B. 180 degrees
C. Either 90 or 180 degrees
D. 30, 60, or 90 degrees
Question 6
In the section view, the areas that would have been in actual contact with the cutting plane are shown with:
A. A cutting plane line
B. Section lining
C. Visible lines
D. Lines and arrows
Question 7
In this type of section, one quarter of the object is removed:
A. Revolved section
B. Removed section
C. Quarter section
D. Half section
Question 8
Objects that are symmetric can be shown effectively using this type of section:
A. Quarter section
B. Half section
C. Full section
D. Symmetric section
Question 9
The ________ is a standard element of a section view in a technical drawing.
A. Cutting Plane line
B. Section lines
C. Material hatch pattern
D. All of the above
Question 10
The section view drawing in which one fourth of an object has been marked for removal is known as a ________ section.
A. full
B. half
C. quarter
D. none of the above
Question 11
These breaks are used to shorten the view of an object:
A. Section breaks
B. Aligned breaks
C. Conventional breaks
D. Full breaks
Question 12
This type of section is limited by a break line:
A. Removed section
B. Revolved section
C. Broken-out section
D. Half section
Question 13
This type of section is not in direct projection from the view containing the cutting plane:
A. Revolved section
B. Removed section
C. Broken-out section
D. Full section
Question 14
To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.
A. whole
B. half
C. broken out
D. all of the above
Question 15
When creating a Cutting Plane line with AutoCAD it is customary to use a ________ to create the line.
A. center line
B. polyline
C. dashed line
D. hatch line
Question 16
When filling an area with a hatch pattern in AutoCAD the drafter needs to be able to ________.
A. see the entire bounding area to hatch
B. set Ortho on
C. turn ISO grid off
D. set the layer to Defpoints
Question 17
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
A. half
B. quarter
C. full
D. broken out