Question 1
Angle made by plane surface with horizontal is called ________
A. Slope
B. Altitude angle
C. Zenith angle
D. Hour Angle
View Answer
Answer: Option A
Explanation:
The slope is the angle made by the plane surfaces with the horizontal. It is considered positive for surfaces slopping towards the south and negative for surface slopping towards the north. Different types of measurements are calculated by slopes.
Answer: Option A
Explanation:
The slope is the angle made by the plane surfaces with the horizontal. It is considered positive for surfaces slopping towards the south and negative for surface slopping towards the north. Different types of measurements are calculated by slopes.
Question 2
How much would be the angle of declination on DECEMBER 21 at 0900 h (LAT). The collector s located in New Delhi (28o35’N, 77o12’E) and is tilted at an angle of 36o with the horizontal and is pointing south?
A. -44.28o
B. -28.92o
C. -23.45o
D. -42.22o
View Answer
Answer: Option C
Explanation:
In the case γ = 0o, on December 21, n=355
Answer: Option C
Explanation:
In the case γ = 0o, on December 21, n=355
Question 3
Instrument used to measure direct beam of solar irradiance is called ____________
A. Pyranometer
B. Net radiometer
C. Gardon gauge
D. Pyrheliometer
View Answer
Answer: Option D
Explanation:
A Pyrheliometer is the device used to measure direct beam solar irradiance. Sunlight enters the instrument through a window and is directed onto a thermopile which converts heat to an electrical signal that can be recorded.
Answer: Option D
Explanation:
A Pyrheliometer is the device used to measure direct beam solar irradiance. Sunlight enters the instrument through a window and is directed onto a thermopile which converts heat to an electrical signal that can be recorded.
Question 4
The angle being measured from a plane and which is equal to angle between the beam of rays and normal to the plane is called __________
A. Incident angle
B. Azimuth angle
C. Hour angle
D. Declination
View Answer
Answer: Option A
Explanation:
The angle being measured from a plane and which is equal to angle between the beam of rays and normal to the plane is called as incident angle. And it is denoted by Greek letter θ (Theta). The angle of incidence (θ) is the angle between the sun’s rays irradiated on a surface and the line normal to this surface.
Answer: Option A
Explanation:
The angle being measured from a plane and which is equal to angle between the beam of rays and normal to the plane is called as incident angle. And it is denoted by Greek letter θ (Theta). The angle of incidence (θ) is the angle between the sun’s rays irradiated on a surface and the line normal to this surface.
Question 5
The angle of deviation of the normal to the surface from the local meridian is called as _________
A. Surface azimuth angle
B. Solar azimuth angle
C. Solar altitude
D. Hour angle
View Answer
Answer: Option A
Explanation:
Surface azimuth angle is the angle of deviation of the normal to the surface from the local meridian, the zero point being south, east positive and west negative. And surface azimuth is different where it is an angle on a horizontal plane between the normal to a vertical surface and the north-south direction line.
Answer: Option A
Explanation:
Surface azimuth angle is the angle of deviation of the normal to the surface from the local meridian, the zero point being south, east positive and west negative. And surface azimuth is different where it is an angle on a horizontal plane between the normal to a vertical surface and the north-south direction line.
Question 6
The time from sunrise to sunset is termed as _______________
A. Slope
B. Day length
C. Local solar time
D. Solar intensity
View Answer
Answer: Option B
Explanation:
The time from sunrise to sunset is termed as day length. On earth, daytime is roughly the period of the day during which any given point in the world experiences natural illumination from especially direct sunlight. Daytime occurs when the sun appears above the local horizon, that is, anywhere on the globe’s hemisphere facing the Sun. During daytime, an observer sees indirect sunlight while in the shade, which includes cloud cover.
Answer: Option B
Explanation:
The time from sunrise to sunset is termed as day length. On earth, daytime is roughly the period of the day during which any given point in the world experiences natural illumination from especially direct sunlight. Daytime occurs when the sun appears above the local horizon, that is, anywhere on the globe’s hemisphere facing the Sun. During daytime, an observer sees indirect sunlight while in the shade, which includes cloud cover.
Question 7
The vector sum of the components along the line normal of the titled surface in a direction normal to the tilted surface is called as __________
A. Solar intensity
B. Declination
C. Incident angle
D. Hour angle
View Answer
Answer: Option A
Explanation:
The solar intensity at a direction normal to the tilted surface is the vector sum of the components along the line normal of the tilted surface. And is given by formula, IΣ = IDN cosθΣ Where IDN = solar intensity irradiated on a surface normal to the sun’s rays.
Answer: Option A
Explanation:
The solar intensity at a direction normal to the tilted surface is the vector sum of the components along the line normal of the tilted surface. And is given by formula, IΣ = IDN cosθΣ Where IDN = solar intensity irradiated on a surface normal to the sun’s rays.
Question 8
What is angle of declination on 305th day of year and what day is it?
A. -23.26o, November 2
B. -15.06o, November 1
C. -18.96o, November 2
D. -10.52o, November 1
View Answer
Answer: Option B
Explanation:
Angle of declination on 305th day of the year i.e. on NOVEMBER 1
Answer: Option B
Explanation:
Angle of declination on 305th day of the year i.e. on NOVEMBER 1
Question 9
What is the angle of declination on 60th day of the leap year?
A. -8.29
B. 8.29
C. 4.82
D. 12.44
View Answer
Answer: Option A
Explanation:
The date is February 29 on leap year, which is considered as the 60th day.
Answer: Option A
Explanation:
The date is February 29 on leap year, which is considered as the 60th day.
Question 10
What is the angle of declination on May 12 considering it’s a leap year?
A. 20.34o
B. 22.85o
C. 29.42o
D. 12.4o
View Answer
Answer: Option A
Explanation:
Angle of declination on May 21 in leap year is 142nd day of the year.
Answer: Option A
Explanation:
Angle of declination on May 21 in leap year is 142nd day of the year.
Question 11
Which type of device is used to measure solar irradiance on a planar surface?
A. Pyranometer
B. Net radiometer
C. Gardon gauge
D. Pyrheliometer
View Answer
Answer: Option A
Explanation:
A Pyranometer is a type of actinometer used for measuring solar irradiance on a planar surface and it is designed to measure the solar radiation flux density from the hemisphere above within a wavelength range 0.3μm to 3μm.
Answer: Option A
Explanation:
A Pyranometer is a type of actinometer used for measuring solar irradiance on a planar surface and it is designed to measure the solar radiation flux density from the hemisphere above within a wavelength range 0.3μm to 3μm.